Ford F-150 / 250 / 350 / 450:

Need engine specifications for 6 cyl engine

You are not logged in.

#1 1/16/2012 5:35 PM

sspringer1
New member
Registered: 1/16/2012
Posts: 1

Need engine specifications for 6 cyl engine

I have a 6 cyl 300 engine 1981 F-100 and l removed the cylinder head because of a blown head gasket and l need the torque spec for the cylinder head and intake and exhaust manifold.

Ford F-150 / 250 / 350 / 450 Recalls, TSBs and Service Information >> ALLDATA

Offline

 
Sponsored Links
ALLDATAdiy.com

The Leading Source of Professional Diagnostic and Repair Information.

#2 1/16/2012 10:33 PM

TechHelp2
Administrator
Registered: 11/24/2009
Posts: 1298

Re: Need engine specifications for 6 cyl engine

The torque for the cylinder head is done in steps; first torque the bolts to 55 ft lbs. Then torque the bolts to 65 ft lbs, and then torque the bolts to 85 ft lbs.

The intake manifold bolt torque is 22ft lbs to 32 ft lbs.

If you need more information you can get back to me and Ill be glad to help.


realworldautomotive.com
car and truck information like nowhere else
Ford F-150 / 250 / 350 / 450 Recalls, TSBs and Service Information >> ALLDATA

Offline

 
E-mail Page
Print Page
Save or Share Information
ALLDATAdiy.com is the leading source of factory diagnostic & repair information specific to your car.

Powered by PunBB
Copyright © 2007-  RealWorldAutomotive.com

Save or Share Automotive Information
Custom Search