Buick Regal:

Removing the serpentine belt

You are not logged in.

# 1  7/6/2010 6:41 PM

Ritchy
Senior Member
Registered: 5/13/2010
Posts: 72

Removing the serpentine belt

How do you remove the serpentine belt on a 1999 Buick Regal with a 3.8L engine?

Offline

 

# 2  7/7/2010 2:46 AM

TechHelp2
Administrator
Registered: 11/24/2009
Posts: 1299

Re: Removing the serpentine belt

Lift or rotate the drive belt tensioner using a 15 mm box end wrench on the pulley nut.
Remove the drive belt.

Lift or rotate the drive belt tensioner using a 15 mm box end wrench on the pulley nut.
Install the drive belt.

There should be a label under the hood that explains how to route the belt when you install it, if you forget which way it went on.

Let us know if this information helped you out.


realworldautomotive.com
car and truck information like nowhere else

Offline

 

# 3  7/7/2010 5:55 PM

Ritchy
Senior Member
Registered: 5/13/2010
Posts: 72

Re: Removing the serpentine belt

Great. Thanks a lot TechHelp2.

Offline

 
E-mail Page
Print Page
Save or Share Information
ALLDATAdiy.com is the leading source of factory diagnostic & repair information specific to your car.

Powered by PunBB
Copyright © 2007-  RealWorldAutomotive.com

Save or Share Automotive Information
Custom Search